Scanning; Scanning A Document; Understanding The Scan Mode Menu - Lexmark 9500 Series User Manual

Scanning

Scanning a document

1
Make sure the printer is connected to a computer, and both the printer and the computer are on.
2
Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.
3
From the control panel, press
4
Press .
5
If your printer is connected to more than one computer:
a
Press or repeatedly until the computer to which you want to scan is highlighted.
b
Press .
If you set a PIN during network setup and are being asked for it:
1
Enter the PIN using
2
Press .
6
Wait until the printer has finished downloading the scan applications list.
7
Make your selections using the control panel buttons.
8
Press .
9
Follow the instructions on your computer screen.

Understanding the Scan Mode menu

1
From the control panel, press
2
Press .
3
If your printer is connected to more than one computer:
a
Press or repeatedly until the computer to which you want to scan is highlighted.
b
Press .
If you set a PIN during network setup and are being asked for it:
1
Enter the PIN by pressing
for that digit.
2
Press .
4
Wait until the printer has finished downloading the scan applications list.
or repeatedly until Scan is highlighted.
and to select a digit location and
or repeatedly until Scan is highlighted.
and to select a digit location, and then press
Scanning
142
and to select a value for that digit.
and to select a value