Cannot Print From Digital Camera Using Pictbridge; Cannot Print From A Bluetooth-Enabled Device - Lexmark 9500 Series User Manual

•
Transparencies or photos contain white lines
•
Glossy photo paper or transparencies stick together

Cannot print from digital camera using PictBridge

These are possible solutions. Try one or more of the following:
E P B
NABLE ICT RIDGE PRINTING FROM CAMERA
Enable PictBridge printing on the camera by selecting the correct USB mode. If the camera USB selection is incorrect,
the camera will be detected as a USB storage device, or an error message will be displayed on the control panel of
the printer. For more information, see the digital camera documentation.
M
AKE SURE THE CAMERA IS A
1
Disconnect the camera.
2
Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to
determine whether it is PictBridge-enabled.
C USB
HECK CABLE
Use only the USB cable that came with the camera.
R
EMOVE MEMORY CARDS
Remove any memory cards from the printer.
C
HECK MESSAGES
If an error message appears on the display, see "Error messages on the computer screen" on page 256.

Cannot print from a Bluetooth-enabled device

If you are having trouble printing from a Bluetooth-enabled device, these are possible solutions. Try one or more of
the following:
M
AKE SURE THAT THE
ENABLED ON YOUR PRINTER
1
From the control panel, press
2
Press .
3
Press or repeatedly until Change Bluetooth Default Settings is highlighted.
4
Press .
The Bluetooth Default Settings menu appears with Bluetooth Enabled highlighted.
5
Press or until On appears.
6
Press or repeatedly until the option for Discovery Mode is highlighted.
P B -
ICT RIDGE
B
LUETOOTH MODE AND THE
or repeatedly until Setup is highlighted.
Troubleshooting
ENABLED DIGITAL CAMERA
B
LUETOOTH
223
D M
ISCOVERY ODE ARE