Table of Contents
Advertisement
BRAKE LEVER ADJUSTMENT/LUBRICATION
a
BRAKE LEVER ADJUSTMENT
1
1. Adjust:
c
Adjustment steps:
2 b
• While pushing the brake lever forward, loosen
• While pushing the brake lever forward, turn the
• Tighten the locknut.
CAUTION:
Be sure to tighten the locknut, as failing to do
so will cause poor brake performance.
LUBRICATION
Brake lever, throttle lever and throttle cable end
1. Lubricate the brake lever pivot, throttle lever and
Apply a dab of grease onto only the end of the
cables.
Do not grease the throttle cables.
They could freeze and cause a loss of control.
2-43
• Brake lever position a
the locknut 1.
adjusting bolt 2 in direction b or c until the
brake lever is in the desired position.
the ends of the throttle cables.
Recommended lubricant:
Throttle lever and throttle cable
end:
ESSO Beacon 325 Grease or
Aeroshell Grease #7A
Brake lever pivot:
Silicon grease
WARNING
INSP
ADJ
Advertisement
Table of Contents
Troubleshooting
