Table of Contents
Advertisement
R Make sure that the catch of the
holder is facing downward.
(FX10/FX10RTR/FX10RTRA/
FX10MTR/FX10MTRA)
S DC back buzzer (FX10/
FX10RTR/FX10RTRA/
FX10MTR/FX10MTRA)
T Fuse box
U Pass the wire harness and DC
back buzzer lead through the
guide, making sure that the guide
is positioned to the front of the
bolt. (FX10/FX10RTR/
FX10RTRA/FX10MTR/
FX10MTRA)
V Route the tail/brake light lead
below the rib on the fuel tank,
making sure not to pinch it
between the tank and the right
fuel tank cover.
W Right fuel tank cover
X Tail/brake light coupler
Y Negative battery lead
Z Negative battery lead coupler
[ Fuel sender coupler
\ Battery
] DC back buzzer coupler (FX10/
FX10RTR/FX10RTRA/
FX10MTR/FX10MTRA)
_ Fuel tank breather hose
a Fasten the brake hose with the
holder.
b Fasten the fuel tank breather
hose to the rear cross member
with the plastic band.
c Main switch coupler
d Wire harness
e To the wire harness
f Pass the wire harness through
the guide, making sure that the
guide positioned to the front of
the bolt. (FX10RT/FX10MT)
g DC back buzzer lead (FX10/
FX10RTR/FX10RTRA/
FX10MTR/FX10MTRA)
h Fasten the parking brake cable
with the holder, making sure to
bend the holder so that its end
contacts the side of the bolt head
as shown in the illustration.
CABLE ROUTING
9-38
SPEC
Advertisement
Table of Contents
Troubleshooting
