Assembly - Yamaha FX10X 2008 Service Manual

1
1
1
b 2
a
a
b
a
SLIDE RAIL SUSPENSION

ASSEMBLY

1. Install:
NOTE:
Install the tension adjusters so that they are angled
outward as shown in the illustration.
1
2. Apply:
1
NOTE:
Apply grease to the bushings 1 and the shaft 2 in
the area a shown in the illustration.
b 5 ~ 15 mm (0.20 ~ 0.59 in)
b
3. Install:
1
NOTE:
Install the control rods with the water drain holes a
facing downward.
4. Install:
NOTE:
Fit the projection a on each collar into the hole b
in its respective sliding frame.
1
4-62
• Suspension wheel bracket
• Front suspension bracket
• Rear suspension bracket
• Connecting arm
• Sliding frame
Cracks/damage → Replace.
• Slide runner
Wear/damage → Replace.
• tension adjusters 1
• ESSO beacon 325 grease or Aeroshell
grease #7A (FX10MT/FX10MTR/FX10MTRA)
• Control rods 1
(FX10MT/FX10MTR/FX10MTRA)
• Collars 1
(FX10/FX10RT/FX10RTR/FX10RTRA)
POWR
TR