Table of Contents
Advertisement
THROTTLE BODY SYNCHRONIZATION
2
1
VALVE CLEARANCE ADJUSTMENT/
NOTE:
• Apply molybdenum disulfide oil to the valve pad
• The valve lifter must turn smoothly when rotated
• Install the valve lifter and the valve pad in the cor-
NOTE:
• Refer to "CAMSHAFTS" in CHAPTER 5.
• Lubricate the camshaft caps, camshaft lobes,
• Align the camshaft marks with the camshaft cap
• Rotate the crankshaft clockwise several turns to
NOTE:
For installation, reverse the removal procedure.
THROTTLE BODY SYNCHRONIZATION
NOTE:
Prior to synchronizing the throttle bodies, the valve
clearance should be properly adjusted.
2-12
• Install the new valve pad 1 and the valve lifter
2.
and the valve lifter.
by hand.
rect place.
• Install the exhaust and intake camshafts, timing
chain and camshaft caps.
Camshaft cap bolt:
10 Nm (1.0 m · kg, 7.2 ft · lb)
camshaft journals and camshaft cap bolts.
marks.
seat the parts.
• Measure the valve clearance again.
• If the valve clearance is still out of specification,
repeat all of the valve clearance adjustment
steps until the specified clearance is obtained.
7. Install:
• All removed parts
8. Add:
• Engine oil
Refer to "ENGINE OIL REPLACEMENT".
1. Remove:
• Fuel tank
Refer to "SEAT AND FUEL TANK" in CHAP-
TER 5.
INSP
ADJ
Advertisement
Table of Contents
Troubleshooting
