Yamaha FX10X 2008 Service Manual page 207

Table of Contents

Assembly steps:

• Install the timing chain tensioner spring and tim-

ing chain tensioner rod 1.

• Squeeze the timing chain tensioner clip 2, and

then push the timing chain tensioner rod 3 into

the timing chain tensioner housing.

Do not release the timing chain tensioner clip while

pushing the rod into the housing, otherwise the rod

may be ejected.

• Hook the clip 4 to the timing chain tensioner

Hook the timing chain tensioner rod pin 5 to the

center of the clip 4. After the installation, check

that the clip 4 can come off by its own weight by

pushing the timing chain tensioner rod 3 at the

position of installation.

11. Inspect:

Damage/wear → Replace the defective

Troubleshooting