Secondary Shaft And Drive Chain Cover Installation - Yamaha FX10X 2008 Service Manual

È
È
1
SECONDARY SHAFT
SECONDARY SHAFT AND DRIVE CHAIN
COVER INSTALLATION
1. Install:
• Secondary shaft
• Drive chain cover
Installation steps:
• Install the secondary shaft.
3
• Tighten the bolts 1.
4
a
5
• Install the drive chain, drive sprocket and driven
6
sprocket.
• Install the drive chain cover 2.
È Properly install the rubber seal onto the drive chain
2
cover, making sure that there are no gaps.
• Tighten the bolts 3.
• Install the collar.
• Tighten the collar set bolt 4.
• Install the brake disc.
• Adjust the brake disc clearance.
2. Measure:
• Brake disc clearance a
4-30
POWR
Bearing housing bolt:
30 Nm (3.0 m · kg, 22 ft · lb)
Drive chain cover bolt:
M8 bolt:
28 Nm (2.8 m · kg, 20 ft · lb)
M6 bolt:
10 Nm (1.0 m · kg, 7.2 ft · lb)
®
LOCTITE
Collar set bolt:
6 Nm (0.6 m · kg, 4.3 ft · lb)
®
LOCTITE
Out of the specification → Adjust.
Brake disc clearance:
0.2 ~ 0.7 mm (0.008 ~ 0.028 in)
TR