Brake Caliper Assembly; Brake Caliper Installation - Yamaha FX10X 2008 Service Manual

1
a
2
BRAKE
1. Inspect:
• Brake caliper pistons
Scratches/rust/wear → Replace the caliper
assembly.
• Brake caliper cylinder
Wear/scratches
assembly.
• Brake caliper body
Cracks/damage → Replace.
• Brake fluid delivery passage (caliper body)
Blow out with compressed air.
WARNING
Replace the piston seals and piston dust seals
whenever a caliper is disassembled.

BRAKE CALIPER ASSEMBLY

WARNING
• All internal parts should be cleaned only with
new brake fluid.
• Internal parts should be lubricated with brake
fluid when installed.
Recommended brake fluid:
DOT 4
• Replace the piston seals and piston dust
seals whenever a caliper is disassembled.

BRAKE CALIPER INSTALLATION

1. Install:
• Brake hose 1
CAUTION:
When installing the brake hose 1 onto the
brake caliper 2, make sure that the brake pipe
touches the projection a on the brake caliper.
Brake hose union bolt:
30 Nm (3.0 m · kg, 22 ft · lb)
4-38
POWR
TR
→
Replace the caliper