Secondary Shaft; Secondary Shaft And Drive Chain Housing Installation - Yamaha VK10W Supplementary Service Manual

7
È
1
4
6
2
5

SECONDARY SHAFT

a
8
9
6
3
6
5
2
4
5
2
28
SECONDARY SHAFT
SECONDARY SHAFT AND DRIVE CHAIN
HOUSING INSTALLATION
1. Install:
• Secondary shaft
• Drive chain housing
Installation steps:
• Install the secondary shaft.
• Tighten the bolt.
Secondary shaft bolt:
30 Nm (3.0 m · kg, 22 ft · lb)
• Install the drive chain housing 1.
• Tighten the bolts and nut 2.
Drive chain housing bolt and nut:
43 Nm (4.3 m · kg, 31 ft · lb)
• Install the drive chain, drive sprocket and
reverse drive gear.
• Install the drive chain housing cover 3.
È Properly install the rubber seal onto the drive chain
housing, making sure that these are no gaps.
• Tighten the bolts 4.
Drive chain housing cover bolt:
43 Nm (4.3 m · kg, 31 ft · lb)
• Tighten the bolts 5.
Drive chain housing cover bolt:
24 Nm (2.4 m · kg, 17 ft · lb)
• Tighten the bolt 6.
Drive chain housing cover bolt:
10 Nm (1.0 m · kg, 7.2 ft · lb)
• Install the collar.
• Tighten the collar set screw 7.
Collar set screw:
6 Nm (0.6 m · kg, 4.3 ft · lb)
®
LOCTITE
• Install the brake disc.
• Adjust the brake disc clearance.
• Adjust the drive chain slack.
POWR
TR