Installing A Multi-Protocol Network Card - Lexmark X560N User Manual

Installing a multi-protocol network card

The system board has one connection for an optional multi-protocol network card.
CAUTION—SHOCK HAZARD: If installing a network card after setting up the printer, turn the printer off, and
unplug the power cord from the wall outlet before continuing.
Warning—Potential Damage: System board electrical components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1
Access the system board.
2
Unpack the network card.
Note: Avoid touching the connection points along the edge of the card.
3
Holding the network card by its sides, align the connector on the card with the connector on the system board.
Installing options
35