Streaked Vertical Lines; Print Is Too Light - Lexmark X560N User Manual

Streaked vertical lines

ABCDE
ABCDE
ABCDE
These are possible solutions. Try one or more of the following:
I
S THE TONER SMEARED
Try feeding from another tray.
I
S A PRINT CARTRIDGE DEFECTIVE
Replace the print cartridge causing the streaks.
I
S THE TRANSFER BELT DEFECTIVE
Replace the transfer belt.

Print is too light

These are possible solutions. Try one or more of the following:
M I
AKE SURE THE MAGE
From Print Properties, adjust the Brightness setting before sending the job to print.
Note: This solution applies to Windows users only.
C P T
HECK THE APER
From Print Properties, make sure the Paper Type setting matches the paper loaded in the tray.
I ?
S THE TONER LOW
When Replace <color> Print Cartridge Soon appears or when the print becomes faded, you may be
able to extend the life of the print cartridge:
1
Remove the specified print cartridge.
2
Firmly shake the cartridge side-to-side and front-to-back several times to redistribute toner.
3
Reinsert the print cartridge and continue printing.
I
S A PRINT CARTRIDGE DEFECTIVE
Replace the print cartridge.
?
?
?
O
PTIONS SETTINGS ARE NOT TOO LIGHT
YPE SETTING
?
Troubleshooting
186