Menu item
Paper Supply
Tray 1 (MPT)
Tray 2
Tray 3
Collated
Off
On
Reduce/Enlarge
200%
154%
129% 8.5x11"->8.5x14"
100%
78% 8.5x14"->8.5x11"
64%
50%
Document Type
Text
Mixed
Photo
Output Quality
Standard
Enhanced
2Sided
1->1Sided
Long Edge Binding
Short Edge Binding
Lighten/Darken
<level indicator>
Sharpness
Sharper
Normal
Softer
Description
Sets the paper source for copies
Notes:
•
Tray 2 is the factory default setting.
•
Tray 3 appears only if Tray 3 is installed.
Stacks the pages of a print job in sequence when printing
multiple copies
Notes:
•
Off is the factory default setting. No pages will be collated.
•
The On setting stacks the print job sequentially.
•
Both settings print the entire job the number of times
specified by the Copy setting.
Reduces or enlarges the printed output
Note: 100% is the factory default setting.
Specifies the type of document being copied
Note: Mixed is the factory default setting.
Specifies the printed output quality
Note: Standard is the factory default setting.
Specifies duplex settings
Note: This menu appears only when the optional duplex unit
is installed.
Lightens or darkens the printed output
Note: Normal is the factory default setting.
Specifies the sharpness of the copies
Note: Normal is the factory default setting.
Understanding printer menus
123