Scanning Takes Too Long Or Freezes The Computer; Poor Scanned Image Quality - Lexmark X560N User Manual

A
N ERROR MAY HAVE OCCURRED IN THE PROGRAM
Turn off and then restart the computer.

Scanning takes too long or freezes the computer

These are possible solutions. Try one or more of the following:
D
O YOU HAVE ANY OTHER SOFTWARE PROGRAMS RUNNING
Close all programs not being used.
T
HE SCAN RESOLUTION MAY BE SET TOO HIGH
Select a lower scan resolution.

Poor scanned image quality

These are possible solutions. Try one or more of the following:
A
RE THERE ANY ERROR MESSAGES ON THE DISPLAY
Clear any error messages.
I
S THE SCANNER GLASS DIRTY
Clean the scanner glass with a clean, lint-free cloth dampened with water.
A
DJUST THE SCAN RESOLUTION
Increase the resolution of the scan for a higher quality output:
1
From the printer control panel, press System.
2
Press or repeatedly until Default Settings appears, and then press OK.
3
Press or repeatedly until Scan Defaults appears, and then press OK.
4
Press or repeatedly until Resolution appears, and then press OK.
5
Press or repeatedly to select a higher resolution, and then press OK.
6
Press repeatedly until Select Function appears.
C
HECK THE QUALITY OF THE ORIGINAL DOCUMENT
Make sure the quality of the original document is satisfactory.
C
HECK THE DOCUMENT PLACEMENT
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
?
Troubleshooting
178
?
?