Dialing Type; Duplex Print; Company Name - Lexmark X560N User Manual

Menu item
Ring Tone Volume
None
Min
Middle
Max
Line Type
PSTN
PBX

Dialing Type

PB
DP(10PPS)
DP(20PPS)
Junk Fax Filter
Off
On
Remote Receive
Off
On
Remote Rcv Tone
00–99

Duplex Print

Off
On
Send Header
Off
On

Company Name

<input company name>
Your Fax Number
<input fax number>
Device Name
<input device name>
Description
Specifies the volume for the incoming faxes
Note: Max is the factory default setting.
Specifies the line type
Note: PSTN is the factory default setting.
Specifies the dialing type
Note: PB is the factory default setting.
When Junk Fax Filter is set to On, incoming faxes are accepted
only from numbers registered in the Address Book.
Note: Off is the factory default setting.
Specifies whether to receive a fax by pressing the remote
receive code on the external telephone after picking up the
handset of the telephone. When Remote Receive is set to On,
a fax can be received by pressing the remote receive code on
the external telephone.
Note: Off is the factory default setting.
Specifies the tone in two digits when Remote Receive is set to
On
Note: 00 is the factory default setting.
Specifies whether to use duplex printing when receiving a fax
Notes:
•
Off is the factory default setting.
•
This option is available only when the printer has a duplex
unit installed.
When Send Header is set to On, the sender record is printed at
the head of the fax.
Note: On is the factory default setting.
Specifies the sender name to be recorded in the sender report
Specifies your telephone number, which is printed at the top
of each page sent from your printer
Specifies your name or your company name, which is printed
on the report sheet
Understanding printer menus
138