Received Fax Has Poor Print Quality; Solving Option Problems; Option Does Not Operate Correctly Or Quits After It Is Installed - Lexmark X560N User Manual

M S
AKE SURE PEED
•
Check to make sure Speed Dial has been programmed for the number that you want to dial.
•
As an alternative, dial the telephone number manually.

Received fax has poor print quality

These are possible solutions. Try one or more of the following:
C
AN THE DOCUMENT BE RE
Ask the person who sent you the fax to:
•
Check that the quality of the original document is satisfactory.
•
Resend the fax. There may have been a problem with the quality of the telephone line connection.
•
Increase the fax scan resolution, if possible.
I ?
S THE TONER LOW
When Replace <color> Print Cartridge Soon appears or when the print becomes faded, you may be
able to extend the life of the print cartridge:
1
Remove the specified print cartridge.
2
Firmly shake the cartridge side-to-side and front-to-back several times to redistribute toner.
3
Reinsert the print cartridge and continue printing.

Solving option problems

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:
R
ESET THE PRINTER
Turn the printer off, wait for about 10 seconds, and then turn the printer on.
C
HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER
1
Turn the printer off.
2
Unplug the printer.
3
Check the connection between the option and the printer.
M
AKE SURE THE OPTION IS INSTALLED
In Print Properties, verify that all the printer configuration settings are correct. If an option does not appear in Print
Properties, it is not installed correctly.
D
IAL IS SET UP PROPERLY
- ?
SENT
Troubleshooting
182