Lexmark X560N User Manual page 135

Menu item
Protocol
LPR
Disable
Enable
Port9100
Disable
Enable
FTP
Disable
Enable
SNMP
Disable
Enable
Email Alerts
Disable
Enable
Web Server
Disable
Enable
Bonjour(mDNS)
Disable
Enable
IP Filter
<list of IP filters>
Initialize NVM
Yes
No
Adobe Protocol
Auto
Standard
BCP
TBCP
Binary
Description
Specifies which network protocol to use
Note: Enable is the factory default setting.
Specifies blocking the reception of data from certain IP
addresses. You can block up to five IP addresses. The change
becomes effective after the printer is turned off and then on
again.
Note: This feature is available only when using LPD or
Port9100.
Initializes network data stored in NVM. After executing this
function and rebooting the printer, all network settings are
reset to the factory default settings.
Specifies PostScript communication protocol for each
interface. You can configure the Adobe Protocol settings for
the network. The change becomes effective after the printer is
turned off and then on again.
Note: Auto is the factory default setting.
Understanding printer menus
135