Adjusting Copy Quality; Making A Copy Lighter Or Darker; Adjusting The Sharpness Of A Copy - Lexmark X560N User Manual

Adjusting copy quality

Choose between Enhanced (best quality) or Standard (fastest speed). To change the quality setting:
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper guides.
3
From the printer control panel, press Copy.
4
Use the keypad to enter the number of copies.
5
To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
6
Press or repeatedly until Output Quality appears, and then press OK.
7
Press or repeatedly until Standard or Enhanced appears, and then press OK.
8
Press Start to begin copying.

Making a copy lighter or darker

To lighten or darken an image when it is copied:
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper guides.
3
From the printer control panel, press Copy.
4
Use the keypad to enter the number of copies.
5
To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
6
Press or repeatedly until Lighten/Darken appears, and then press OK.
7
Press or repeatedly to lighten or darken the image, and then press OK.
8
Press Start to begin copying.

Adjusting the sharpness of a copy

To adjust the sharpness of the copied image:
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper guides.
3
From the printer control panel, press Copy.
4
Use the keypad to enter the number of copies.
Copying
65