Network Card Menu - Lexmark XM1140 User Manual

Understanding the printer menus
Reports menu
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > Reports
•
Network/Ports > Network [x] > Network [x] Setup > Reports
Use To
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP
address.

Network Card menu

To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > Network Card
•
Network/Ports > Network [x] > Network [x] Setup > Network Card
Use
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0, 10–225 seconds
Banner Page
Off
On
TCP/IP menu
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > TCP/IP
•
Network/Ports > Network [x] > Network [x] Setup > TCP/IP
Note: This menu is available only in network printers or printers attached to print servers.
Use
Set Hostname
To
View the connection status of the wireless network adapter.
View the speed of an active wireless network adapter.
View the network addresses.
Set the amount of time it takes for a network print job to be canceled.
Notes:
•
"90 seconds" is the factory default setting.
•
A setting value of 0 disables the timeout.
• If a value between 1 and 9 is selected, then Invalid appears on the
display, and the value is not saved.
Allow the printer to print a banner page.
Note: Off is the factory default setting.
To
Set the current TCP/IP host name.
Note: This can be changed only from the Embedded Web Server.
130