SNMP Global Settings
This window is used to configure the SNMP global settings and trap settings.
To view the following window, click Management > SNMP > SNMP Global Settings, as shown
below:
The fields that can be configured for SNMP Global Settings are described below:
Parameter
SNMP Global State
The fields that can be configured for Trap Settings are described below:
Parameter
Trap Global State
SNMP Authentication Trap
Port Link Up
Port Link Down
Coldstart
Warmstart
Click the Apply button to accept the changes made.
SNMP Community Table Settings
This window is used to create an SNMP community string to define the relationship between the
SNMP manager and an agent. The community string acts like a password to permit access to the
agent on the Switch. One or more of the following characteristics can be associated with the
community string:
•
Read/write or read-only level permission for the MIB objects accessible to the SNMP community.
To view the following window, click Management > SNMP > SNMP Community Table Settings, as
shown below:
Figure 6-2 SNMP Global Settings window
Description
Select this option to enable or disable the SNMP feature.
Description
Select this option to enable or disable the sending of all or
specific SNMP notifications.
Tick this option to control the sending of SNMP
authentication failure notifications.
Tick this option to control the sending of port link up
notifications.
Tick this option to control the sending of port link down
notifications.
Tick this option to control the sending of SNMP ColdStart
notifications.
Tick this option to control the sending of SNMP WarmStart
notifications.
3
3
D-Link DGS-1100 Series Switch User Manual
3
3