L2 Multicast Control
IGMP Snooping
Internet Group Management Protocol (IGMP) snooping allows the Switch to recognize IGMP queries
and reports sent between network stations or devices and an IGMP host.
IGMP Snooping Settings
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP
Snooping Settings, as shown below:
The field that can be configured for Global Settings is described below:
Parameter
Global State
Click the Apply button to accept the changes made.
The fields that can be configured for VLAN Status Settings are described below:
Parameter
VID
Click the Apply button to accept the changes made.
The fields that can be configured for VLAN Querier Status Settings are described below:
Parameter
VID
Enter a page number and click the Go button to navigate to a specific page when multiple pages
exist.
Figure 7-278 IGMP Snooping Settings window
Description
Select this option to enable or disable IGMP snooping global
state.
Description
Enter a VLAN ID from 1 to 4094, and select to enable or
disable IGMP snooping on the VLAN.
Description
Enter a VLAN ID from 1 to 4094, and select to enable or
disable IGMP snooping on the VLAN.
D-Link DGS-1100 Series Switch User Manual
5
5
5
5