Smart Wizard
After a successfully connecting to the Web User Interface for the first time, the Smart Wizard
embedded Web utility will be launched. This wizard will guide the user through basic configuration
steps that is essential for first time connection to the Switch.
Step 1 – System IP Information
In this window, the user can configure the IP address assignment method, the static IP address,
Netmask and Gateway address.
The fields that can be configured are described below:
Parameter
Static
DHCP
IP Address
Netmask
Gateway
Figure 4-4 System IP Information window
Description
Select this option to manually configure and use IP address
settings on this switch.
Select this option to obtain IP address settings from a DHCP
server.
Enter the IP address of the Switch here.
Select the Netmask option here.
Enter the default gateway IP address here.
1
1
D-Link DGS-1100 Series Switch User Manual
4
4