D-Link DGS-1100-16 Reference Manual page 48

Click the Back button to return to the previous window.
When Hybrid was selected as the VLAN Mode, the following page will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
VID
Action
Allowed VLAN Range
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
When Trunk is selected as the VLAN Mode, the following page will appear.
The fields that can be configured are described below:
Figure 7-13 Configure VLAN Interface - Hybrid window
Description
Select the VLAN mode option here. Options to choose from
are Access, Hybrid, and Trunk.
Select the acceptable frame behavior option here. Options to
choose from are Tagged Only, Untagged Only, and Admit
All.
Select the check box to enable or disable the ingress
checking function.
Enter the VLAN ID used for this configuration here. This
value must be between 1 and 4094.
Select the action that will be taken here. Options to choose
from are Remove, Tagged, and Untagged.
Enter the allowed VLAN range information here.
Figure 7-14 Configure VLAN Interface - Trunk window
D-Link DGS-1100 Series Switch User Manual
4 4 2 2