System Information Settings
The user can enter a System Name, System Location, and System Contact to aid in defining the
Switch.
To view the following window, click System > System Information Settings, as shown below:
The fields that can be configured are described below:
Parameter
System Name
System Location
System Contact
Click the Apply button to accept the changes made.
IPv4 Interface
This window is used to configure the IPv4 settings of the switch.
To view the following window, click System > System Information Settings > IPv4 Interface, as
shown below:
The fields that can be configured are described below:
Parameter
Get IP From
IP Address
Figure 5-2 System Information Settings window
Description
Enter a system name for the Switch, if so desired. This name
will identify it in the Switch network.
Enter the location of the Switch, if so desired.
Enter a contact name for the Switch, if so desired.
Figure 5-3 Peripheral Settings window
Description
Select DHCP to automatically obtain an IP address. Select
Static to manually configure the IP address settings. BOOTP
allows the switch to get an IP configuration using the BOOTP
protocol.
If Static is selected, enter the IP address of the switch. If
DHCP or BOOTP is selected, the automatically obtained IP
address will be displayed.
D-Link DGS-1100 Series Switch User Manual
1
1
9
9