Table of Contents
Advertisement
HP Series 6000
Setting the TEST Switch
Models 330S and 660S
The TEST switch (see Figure 4-5) is used
to
activate the
continuous audio mode in your CD-ROM drive. When
the continuous audio mode is activated, you can play an
audio CD in your CD-ROM drive (refer
to
"Playing Audio
Compact Discs" in this chapter). If you do
not
want
to
activate the continuous audio mode, set the TEST switch to
o.
The following table shows the function of the TEST
switch with the PRTY and ARBT switches for both switch
positions:
You must cycle power off and back on again for the
CD-ROM drive
to
recognize the new switch settings.
PRTY
ARBT TEST
Function
1
1
0
Normal operating mode.
0
0
1
Continuous audio mode.
CD-ROM Drive 4-27
Advertisement
Table of Contents
