HP 6000 330s Owner's Manual page 162

Models 330S and 660S
Setting the PRTY Switch
Setting the ARBT Switch
4-26 CD-ROM Drive
HP Series 6000
The PRTY switch (see Figure 4-5) must be set to 1 for your
CD-ROM drive to operate properly in your mass storage
system. The following table shows the function of the
PRTY switch for both switch positions:
PRTY
Function
0
No parity check executed.
1
Parity check executed.
The ARBT switch (see Figure 4-5) must be set to 1 for your
CD-ROM drive to operate properly in your mass storage
system. The following table shows the function of the
ARBT switch for both switch positions:
ARBT Function
0
Non-arbitration system.
1
Arbitration system.