Original Pick-Up And Feed Roller Removal - Ricoh C217 Service Manual

1.5 ORIGINAL PICK-UP AND FEED ROLLER REMOVAL

[C]
1. Follow steps 1 to 5 in "1.3 EXPOSURE LAMP REMOVAL" to remove
the lower original guide plate.
2. Remove the bracket [A] with the original registration sensor (1 screw).
3. Remove the original pick-up roller [B] and original feed roller [C] (2
E-rings, 2 bushings, and 1 gear each).
CAUTION: Note that the gear on the pick-up roller shaft has a built in
one-way clutch. Make sure that the blue flange of the gear
[D] faces the outside.
C217
[B]
[A]
5-8
[D]
SM