1.4 ORIGINAL SET AND REGISTRATION SENSOR REMOVAL
UPPER ORIGINAL REGISTRATION SENSOR:
1. Follow steps 1 to 5 in "1.3 EXPOSURE LAMP REMOVAL" to remove
the lower original guide plate.
2. Remove the lower original registration sensor [A] (light emitter) (1 screw).
LOWER ORIGINAL REGISTRATION AND ORIGINAL SET SENSORS:
1. Follow steps 1 to 3 in "1.2 ORIGINAL FRICTION PAD REMOVAL" to
remove the upper original guide plate.
2. Remove the ADF base [B] (4 screws).
3. Remove the upper original registration sensor [C] (light receiver)
(1 screw) and original set sensor [D].
SM
[D]
[B]
[C]
5-7
[A]
C217