Original Friction Pad Removal - Ricoh C217 Service Manual

1.2 ORIGINAL FRICTION PAD REMOVAL

[B]
1. Turn off the main switch and disconnect the power plug.
2. Open the ADF and remove the white plate [A] (2 screws).
3. Remove the upper original guide plate [B] (1 screw).
NOTE: Using a minus screwdriver lift the rear (non-operation side) of
the guide plate, which is hooked under the rear side frame, as
shown [C], but not in the front side (operation side).
When installing the guide plate, set the hook on the operation
side first.
SM
[A]
5-3
[C]
C217