Input/Output Check Mode; Access Procedure; Drum Free Run Mode - Ricoh C217 Service Manual

4. INPUT/OUTPUT CHECK MODE

The electrical components can be checked by this program. The input check
mode can check if the sensors or switches function correctly. The output
check mode can manually activate the electrical devices, such as motors
and solenoids.

4.1 ACCESS PROCEDURE

1. Turn on the main switch while holding down the Print Start, Stop, and
Clear keys at the same time.
2. The memory indicator will display "01" which indicates that the Input
Check mode is selected.
3. To select the Output Check mode, press the Memory/Class key. The
memory indicator will display "00".

4.2 DRUM FREE RUN MODE

1. Select either the Input or Output Check mode.
2. Select the Photo mode by pressing the Image Mode key.
3. Free run starts by pressing the Image Density key. Operation depends
on the image Density selection as follows:
Image Density Selection
Lighter
Normal
Darker
Darkest
NOTE: The drum speed can be changed by the Speed key.
C217
Drum Speed
30rpm
Stop
30rpm
70/100/130rpm (see Note)
4-8 SM