Ibm And Compatibles - Serial; Macintosh Computers - Appletalk Standard - Ricoh C217 Service Manual

B. IBM and compatibles - Serial
1. Make sure that the customer's computer is turned off.
2. Attach the DB-25 Female end of a standard PC serial printer cable to the
customer designated serial output port on the rear of the computer.
Record the choice of COM1 or COM2 because this port name will be
required during the configuration process.
3. Attach the other end (DB-25 Male) of a standard PC serial printer cable
to the input port on the rear of the PCRIP-10 labeled "Serial In".
Priport
C. Macintosh computers - AppleTalk Standard
1. Make sure that the customer's computer is turned off.
2. Attach one 8-pin mini din Male end of a standard Macintosh printer cable
to the printer output port on the rear of the computer.
3. Attach the other end (8-pin mini din Male) of a standard Macintosh
printer cable to the input port on the rear of the PCRIP-10 labeled
"AppleTalk".
Priport
SM
Parallel In Digital Duplicator
Diagnostic Serial In
Figure B - Serial Connection
Parallel In Digital Duplicator
Diagnostic Serial In
Figure C - AppleTalk Connection
7-9
AppleTalk
Personal Computer
AppleTalk
Macintosh
C217