Paper Feed Section; Paper Feed Roller And Friction Pad Removal - Ricoh C217 Service Manual

5. PAPER FEED SECTION

5.1 PAPER FEED ROLLER AND FRICTION PAD REMOVAL

1. Turn off the main switch and disconnect the power plug.
2. Lower the paper table, and remove the paper feed roller [A] (1 snap ring).
CAUTION: 1) Do not lose the small spacer [B] inside the paper feed
roller.
2) Install the paper feed roller in the proper direction due
to the one-way built-in clutch. The smooth flange [C]
faces outside.
3. Remove the friction pad base [D]. Peel off the friction pad and replace it if
necessary.
CAUTION: 1) Install the friction pad base in the proper direction as
shown. Otherwise, paper misfeeds will occur.
2) Be sure that the hole [E] in the friction pad base and
projection [F] in the bottom hold the friction pressure
spring properly. Otherwise, paper misfeeds will occur.
SM
[E]
[F]
5-21
[B]
[D]
[C]
[A]
C217