Olivetti d-Copia 3501 Service Manual page 219

66-6
User data output/Check (Display/Print)
Purpose
Used to print the confidential pass code. (Used
Function
when the confidential pass code is forgotten.)
(Purpose)
(Only when FAX is installed)
FAX
Section
Data
Item
Operation/Procedure
1 PRINT START
The paper is automatically selected with the size saved in the
image memory.
SIMULATION 66-6
PASS CODE PRINT OUT. PRESS START.
1.PRINT START
Press [START] key.
When there is no print data,
the display returns to the
original state without printing.
(When 1)
SIMULATION 66-6
PASS CODE PRINT OUT. EXECUTING···.
1.PRINT START
After completion of printing
66-7
User data output/Check (Display/Print)
Purpose
Used to print the image memory data (memory
Function
send/receive). (Only when FAX is installed)
(Purpose)
FAX
Section
Data
Item
Operation/Procedure
All image data stored in the image memory are printed.
∗ The confidential receive data are also printed.
1 PRINT START
The paper is automatically selected with the size saved in the
image memory.
SIMULATION 66-7
IMAGE MEMORY PRINT OUT. PRESS START.
1.PRINT START
Press [START] key.
(When 1)
SIMULATION 66-7
IMAGE MEMORY PRINT OUT. EXECUTING···.
1.PRINT START
After completion of printing
9-76
Print start
Print start
66-8
Operation test/Check
Purpose
Used to check the output operation of various
Function
sound signals of FAX. (Used to check the
(Purpose)
operation of the sound output IC.) Send level:
Max. (Only when FAX is installed)
FAX
Section
Operation
Item
Operation/Procedure
1) Enter the number corresponding to the output mode with 10-
key.
2) Press [START] key.
The output is delivered at the max. level.
1 NONE Mute
2 PAUSE Pause sound 12 MESSAGE 10
3 MESSAGE1 Message 1
4 MESSAGE2 Message 2
5 MESSAGE3 Message 3
6 MESSAGE4 Message 4
7 MESSAGE5 Message 5
8 MESSAGE6 Message 6
9 MESSAGE7 Message 7
10 MESSAGE8 Message 8
When the number is entered during execution, the kind of signal
can be changed.
When [START] key is pressed, the voice message is sent. When
[CUSTOM SETTINGS] key is pressed, it is stopped.
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX)
START.
1.NONE
4.MESSAGE2
7.MESSAGE5
10.MESSAGE8
13.MESSAGE11
16.MESSAGE14
19.RINGER
Select other 1, and press [START] key.
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX)
START. EXECUTING···.
1.NONE
4.MESSAGE2
7.MESSAGE5
10.MESSAGE8
13.MESSAGE11
Same
16.MESSAGE14
display
19.RINGER
Select 2, and press [START] key.
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX)
START. EXECUTING···.
1.NONE
4.MESSAGE2
7.MESSAGE5
10.MESSAGE8
13.MESSAGE11
16.MESSAGE14
19.RINGER
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX)
START.
1.NONE
4.MESSAGE2
7.MESSAGE5
10.MESSAGE8
13.MESSAGE11
16.MESSAGE14
19.RINGER
Service Manual
11 MESSAGE 9 Message 9
Message 10
13 MESSAGE 11 Message 11
14 MESSAGE 12 Message 12
15 MESSAGE 13 Message 13
16 MESSAGE 14 Message 14
17 MESSAGE 15 Message 15
18 ALARM Alarm
19 RINGER Call ring
20 EXT.TEL.RINGER External TEL ring
SELECT 1-20, AND PRESS
2.PAUSE 3.MESSAGE1
5.MESSAGE3 6.MESSAGE4
8.MESSAGE6 9.MESSAGE7
11.MESSAGE9 12.MESSAGE10
14.MESSAGE12 15.MESSAGE13
17.MESSAGE15 18.ALARM
20.EXT.TEL.RINGER
Press [CUSTOM SETTINGS] key.
SELECT 1-20, AND PRESS
2.PAUSE 3.MESSAGE1
5.MESSAGE3 6.MESSAGE4
8.MESSAGE6 9.MESSAGE7
11.MESSAGE9 12.MESSAGE10
14.MESSAGE12 15.MESSAGE13
17.MESSAGE15 18.ALARM
20.EXT.TEL.RINGER
SELECT 1-20, AND PRESS
2.PAUSE 3.MESSAGE1
5.MESSAGE3 6.MESSAGE4
8.MESSAGE6 9.MESSAGE7
11.MESSAGE9 12.MESSAGE10
14.MESSAGE12 15.MESSAGE13
17.MESSAGE15 18.ALARM
20.EXT.TEL.RINGER
Press [CUSTOM SETTINGS] key.
SELECT 1-20, AND PRESS
2.PAUSE 3.MESSAGE1
5.MESSAGE3 6.MESSAGE4
8.MESSAGE6 9.MESSAGE7
11.MESSAGE9 12.MESSAGE10
14.MESSAGE12 15.MESSAGE13
17.MESSAGE15 18.ALARM
20.EXT.TEL.RINGER
Y105220-6
2
1
2
2