Olivetti d-Copia 3501 Service Manual page 191

46-24
Adjustment
Purpose
Used to adjust the scanner exposure level (in the
Function
super fine text mode).
(Purpose)
Picture quality
Item
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key. (Select one of 0 - 11.)
∗ Normal mode (Image density adjustment level)
∗ Normal mode (Image density adjustment level) (Half-tone
mode)
∗ Auto mode
∗ Auto mode (Half-tone mode)
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
Item
0 AUTO Auto
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
6 AUTO (H) Auto (Half-tone)
7 1.0 (H) Exposure level 1 (Half-tone)
8 2.0 (H) Exposure level 2 (Half-tone)
9 3.0 (H) Exposure level 3 (Half-tone)
10 4.0 (H) Exposure level 4 (Half-tone)
11 5.0 (H) Exposure level 5 (Half-tone)
NOTE: Only the set value is changed and no printing is performed.
SIMULATION 46-24
EXP.LEVEL SETUP SCANNER(SUPER FINE). SELECT 0-11,AND
PRESS START.
0.AUTO 50 1.1.0 50
3.3.0 50 4.4.0 50
6.AUTO(H) 50 7.1.0(H) 50
9.3.0(H) 50 10.4.0(H) 50
Select other than 0 - 11, and
press [START] key.
SIMULATION 46-24
EXP.LEVEL SETUP SCANNER(SUPER FINE). INPUT VALUE 0-99,
AND PRESS START.
0.AUTO
9-48
Density
Set
Default
range
0 - 99 50
2.2.0 50
1
5.5.0 50
8.2.0(H) 50
11.5.0(H) 50
Press [START] key, or
press [CUSTOM SETTINGS] key.
50
46-25
Adjustment
Purpose
Used to adjust the scanner exposure level in the
Function
ultra fine text mode.
(Purpose)
Picture quality
Item
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key. (Select one of 0 - 11.)
∗ Normal mode (Image density adjustment level)
∗ Normal mode (Image density adjustment level) (Half-tone
mode)
∗ Auto mode
∗ Auto mode (Half-tone mode)
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
Item
0 AUTO Auto
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
6 AUTO (H) Auto (Half-tone)
7 1.0 (H) Exposure level 1 (Half-tone)
8 2.0 (H) Exposure level 2 (Half-tone)
9 3.0 (H) Exposure level 3 (Half-tone)
10 4.0 (H) Exposure level 4 (Half-tone)
11 5.0 (H) Exposure level 5 (Half-tone)
NOTE: Only the set value is changed and no printing is performed.
SIMULATION 46-25
EXP.LEVEL SETUP SCANNER(ULTRA FINE). SELECT 0-11,AND
PRESS START.
0.AUTO 50 1.1.0
3.3.0 50 4.4.0
6.AUTO(H) 50 7.1.0(H)
9.3.0(H) 50 10.4.0(H)
Select other than 0 - 11, and
press [START] key.
SIMULATION 46-25
EXP.LEVEL SETUP SCANNER(ULTRA FINE). INPUT VALUE 0-99,
AND PRESS START.
0.AUTO
Service Manual
Set
range
0 - 99
50 2.2.0 50
50 5.5.0 50
50 8.2.0(H) 50
50 11.5.0(H) 50
Press [START] key, or
press [CUSTOM SETTINGS] key.
Y105220-6
Density
Default
50
50