Olivetti d-Copia 3501 Service Manual page 174

27-5
Setting
Purpose
Used to enter the machine tag No. (This function
Function
allows to check the tag No. of the machine with the
(Purpose)
host computer.)
Communication unit (TEL/LIU/MODEM etc.)
Section
Specifications
Item
Operation/Procedure
1) Enter the tag number with 10-key.
2) Press [START] key.
SIMULATION 27-5
TAG # SETTING. INPUT VALUE, AND PRESS START.
PRESENT: 00010000
NEW: 00009999
30
30-1
Operation test/Check
Purpose
Used to check the operation of sensors and
Function
detectors in other than the paper feed section and
(Purpose)
the operations of the related circuits.
Operation
Item
Operation/Procedure
The operating conditions of sensors and detectors are displayed.
The active sensors and detectors are highlighted.
PPD1 Resist roller front paper detection
POD1 After-fusing transport detection 1
POD2 After-fusing transport detection 2
POD3 Paper full detection
DSWL Cabinet open detection
DSWF Front door
SIMULATION 30-1
SENSOR CHECK..
PPD1 POD1 POD2 POD3
DSWF
30-2
Operation test/Check
Purpose
Used to check the operation of sensors and
Function
detectors in the paper feed section and the related
(Purpose)
circuits.
Paper feed
Section
Operation
Item
Operation/Procedure
The operating conditions of sensors and detectors are displayed.
The active sensors and detectors are highlighted.
Y105220-6
Operation mode
DSWL
CSS1 Tray 1 insertion detection
PED Tray 1 paper empty detection
LUD Tray 1 upper limit detection
MCSET MP unit detection
MCDRS MP unit side door open detection
MCPPD MP tray transport detection
MCLUD MP tray upper limit detection
MCPED MP tray paper empty detection
MCSPD MP tray remaining quantity detection
MCSS1 MP tray size detection 1
MCSS2 MP tray size detection 2
MCSS3 MP tray size detection 3
MCSS4 MP tray size detection 4
MP Tray size (The detection size of MP tray is displayed.)
MPFSET Manual feed tray detection
MPED Manual feed tray paper empty detection
MPLD Manual feed length detection
MPLS1 Manual feed pull-out sensor 1
MPLS2 Manual feed pull-out sensor 2
Bypass Tray size (The detection size of manual feed tray is
displayed.)
SIMULATION 30-2
TRAY SENSOR CHECK..
CSS PED LUD
MCSET MCDRS MCPPD MCLUD MCPED MCSPD MCSS1 MCSS2
MCSS3 MCSS4
MPFSET MPED MPLD
40
40-1
Operation test/Check
Purpose
Used to check the operation of the manual feed
Function
tray paper size detector and the related circuit.
(Purpose)
(The operation of the manual feed tray paper size
detector can be monitored with the LCD display.)
Paper feed
Section
Operation
Item
Operation/Procedure
The operating conditions of sensors and detectors are displayed.
The active sensors and detectors are highlighted.
The paper width size detection level is displayed.
MPLD
MPLS1
MPLS2
BYPASS_WIDTH
BYPASS_AD
Bypass Tray width
size
SIMULATION 40-1
BYPASS TRAY SENSOR CHECK..
MPLD MPLS1
BYPASS_WIDTH: 2100
(Bypass Tray width size: A4/A3)
Sevice Manual
(MP Tray size: A4 )
MPLS1 MPLS2
(Bypass Tray size: A3 )
Manual tray length detection
Manual tray pull-out detection 1
Manual tray pull-out detection 2
Manual feed guide plate position
Manual feed width detection volume
output AD value
(Manual tray detection size is displayed.)
A4/A3, 11 x, B5/B4, 8.5 x , A4R, B5R,
A5R, 5.5x, 7.25x, EXTRA
MPLS2
BYPASS_AD: 600
9-31