Sending Data To A File Server - Canon imageRunner C5051 Getting Started

Sending Data to a File Server

The following operations and settings are required to send data to a file server with the machine.
•
For information on the system requirements for using this function, see "Sending Data, " on p. 4-6.
•
The file servers you can use depend on the network you are using. For information on the file servers you can use, refer to the following,
according to the network you are using.
- For a TCP/IP network: see "Setting Up a Computer as a File Server, " on p. 6-29.
- For an SMB/CIFS network: see "Setting Up a Computer as a File Server, " on p. 8-7.
2
1
Connect the machine to the network .
See "Connecting to a Network, " on p. 5-3.
See "Interface Settings, " on p. 5-9.
2
Set the machine for the type of network you are using .
For a TCP/IP network
See "TCP/IP Network Setup Procedures, " on p. 6-2.
See "Protocol Settings, " on p. 6-3.
For an SMB/CIFS network
See "SMB/CIFS Network Setup Procedures, " on p. 8-2.
See "Protocol Settings, " on p. 8-3.
3
Set up the file server .
For an FTP server
See "FTP Server Settings, " on p. 6-30.
For a WebDAV server
See "WebDAV Server Settings, " on p. 6-39.
For a Windows shared folder/Samba shared folder
See "Setting Up a Computer as a File Server, " on p. 8-7.
2-8
Operations Required to Use the Machine