Remote Fax Rx Settings - Canon imageRunner C5051 Getting Started

1
Press → [Function Settings] → [Send] → [Fax Settings] → [Remote Fax TX Settings] .
To specify the remote fax server address:
☐
Press [Remote Fax Server Address].
☐ Enter the host name or the IP address → press [OK].
A host name is a name assigned to a host computer that provides services on the network. Enter the name for Remote Fax Server.
To specify the TX Timeout settings:
☐ Press [TX Timeout].
☐ Specify the TX timeout time by pressing [-] or [+] → press [OK].
To select the number of lines to use for sending:
☐ Press [No. of Sending Lines].
☐
Set the telephone line number to use for sending.
To select the priority line:
☐
Press [Select Priority Line].
☐ Select [Auto] or the line to use as a priority.

Remote Fax RX Settings

You can specify the settings for receiving remote faxes from the client-side. To receive remote faxes, it is necessary to specify
the settings to receive forwarded documents from the server machine as an I-fax. For information on I-fax settings, see
"Sending E-Mail/I-Faxes, " on p. 2-7.
11-11
Remote Fax Settings
11