Main Power And Control Panel Power; How To Turn On The Main Power - Canon imageRunner C5051 Getting Started

Main Power and Control Panel Power

The machine is provided with two power switches, a main power switch and a control panel power switch, as well as a
breaker that detects excess current or leakage current.

How to Turn ON the Main Power

1
This section explains how to turn ON the main power.
If you want to turn OFF the main power and then back ON again, wait for at least 10 seconds after the main power indicator is turned OFF
before turning ON the main power.
1
Make sure that the power plug is firmly inserted into the power outlet .
Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock .
2
If the Security Key is inserted into the machine, make sure that it is in the ON positions (turn it to
the right) .
3
Press the main power switch to the ON ( "I" side) position .
The main power indicator on the control panel lights when the main power switch is turned ON.
When operating the main power switch, open the main power switch cover.
1-14

Main Power and Control Panel Power

Security Key
When using the machine, insert the security
key into the key switch unit, and then turn it to the right.