Before Starting Sms (Preparations); Enabling The Machine To Be Accessed From Web Browsers - Canon imageRunner C5051 Getting Started

Before Starting SMS (Preparations)

Before logging in to the SMS, start the machine and follow the procedure below:
Specify the Network Settings
Specify the settings under Network in Preferences (from the Settings/Registration screen) and find out the machine's IP address.
If you do not know the machine's IP address, consult your network administrator. (See "Protocol Settings, " on p. 6-3.)
Enable Access to the Machine from the Web Browser
Set [Use HTTP] to 'On' in [TCP/IP Settings] in [Network] in Preferences (Settings/Registration).If it is not set to 'On' , you cannot access the
machine from the Web browser.
•
You cannot connect to the machine via a proxy server. Specify the following settings if you are working in an environment using a proxy
server (as these settings differ depending on the network environment, consult the network administrator).
- In the proxy server settings of your web browser, add the IP address of the machine to the [Exceptions] (addresses that do not use a
proxy) list.
•
You cannot use SMS if your web browser is not set to enable cookies and JavaScript.
•
When entering characters from your web browser, use characters that can be entered from the touch panel display of the machine.
Otherwise, the characters may not be displayed or recognized correctly on the touch panel display.

Enabling the Machine to be Accessed from Web Browsers

Use to access the machine from a Web browser to use the MEAP function.
•
The default setting is 'On' .
•
By setting [Use HTTP] to 'On' , you can open a necessary port. However, it is recommended that it is set to 'Off' , if a port is not used. If you
leave the port open, an unauthorized user may access the machine.
1
Press → [Preferences] .

Before Starting SMS (Preparations)

15
15-7