Sending E-Mail/I-Faxes - Canon imageRunner C5051 Getting Started

3
Enter the System Manager ID and System Password → press [OK] .
When you are finished with the operation, press [Log Out] or

Sending E-Mail/I-Faxes

The following operations and settings are required to send e-mail/I-faxes with the machine.
For information on the system requirements for using this function, see "Using E-Mail/I-Fax, " on p. 4-5.
1
Connect the machine to the network .
See "Connecting to a Network, " on p. 5-3.
See "Interface Settings, " on p. 5-9.
2
Set the machine to use the TCP/IP network .
See "TCP/IP Network Setup Procedures, " on p. 6-2.
See "Protocol Settings, " on p. 6-3.
3
Specify the e-mail/I-fax settings .
See "E-Mail/I-Fax Settings, " on p. 6-26.
(Log In/Out) on the control panel to log out.
Operations Required to Use the Machine
2
2-7