Canon imageRunner C5051 Getting Started page 119

3
On the IPv6 Settings screen, press [Stateless Address Settings] → specify the following .
[On] for <Use Stateless Address>: A stateless address is automatically set when the machine is started.
The stateless address is discarded when the machine is restarted (with the machine's main power switch ON).
4
On the IPv6 Settings screen, press [Manual Address Settings] → specify the following .
[On] for <Use Manual Address>: You can set the IPv6 address manually.
Enter the IPv6 address value in [Manual Address] and the IPv6 address prefix length in [Prefix Length].
Enter the default router address value in [Default Router Addr.]. If you do not want to specify the default router address, leave [Default
Router Addr.] blank.
•
You cannot use a manual address if you leave [Manual Address] blank. You also cannot set any of the following types of address for
[Manual Address]:
- Multicast address
- Address composed entirely of zeros
- IPv4 compatible address (an IPv6 address with the top 96 bits set to '0' and an IPv4 address in the lower 32 bits)
- IPv4 mapped address (an IPv6 address with the top 96 bits set to '0:0:0:0:0:ffff:' and an IPv4 address in the lower 32 bits)
•
You cannot enter a multicast address or an address composed entirely of zeros in [Default Router Addr.].
6-11
Protocol Settings
6