Enabling The Remote Ui - Canon imageRunner C5051 Getting Started

Enabling the Remote UI

You must use the machine's control panel to enable the Remote UI.
By setting [Remote UI] to 'On' , you can open a necessary port. However, it is recommended that it is set to 'Off' , if a port is not used. If you
leave the port open, an unauthorized user may access the machine.
1
Press
If the System Manager ID and System Password have already been set, enter the System Manager ID and System Password using
-
2
Select [On] → select whether to use SSL .
Select [Off ] to disable the Remote UI.
<Use SSL>:
[On]: Allows secured transmission using SSL.
[Off ]: Prohibits secured transmission using SSL.
<Use Reference Print >::
[On]: Allows printing by entering its URL.
[Off ]: Prohibits printing by entering its URL
15
Any changes made to <Use SSL> are also applied to <Use SSL> in <Use HTTP> in MEAP Settings in Management Settings (from
the Settings/Registration screen).
3
Press [OK] repeatedly until the Top screen appears .
15-4
Before You Start the Remote UI
→ [Management Settings] → [License/Other] → [Remote UI] .
(numeric keys) → press
.