Canon imageRunner C5051 Getting Started page 103

If you want to specify a Community Name 1
☐ Press [Set Community Name 1] → [On] → specify the settings for <MIB Access Permission> and the community name in [Com-
munity Name].
You can also change the community name in [Community Name] to a name other than 'public' .
If you want to specify a Community Name 2
☐ Press [Set Community Name 2 ] → [On] → specify the settings for <MIB Access Permission> and the community name in [Com-
munity Name].
You can also change the community name in [Community Name] to a name other than 'public2' .
2
Specify the settings for SNMP v . 3 .
[On] for <Use SNMP v. 3>: Specify the user and context according to the following procedures.
Communication Environment Setup
5
5-13