Send Tx Report/Send Error Tx Report - Canon imageRunner C5051 Getting Started

DESTINATION ADDRESS
The address of the recipient is printed.
DESTINATION ID
The name of the recipient is printed.
JOB NO .
The four digit number, that is automatically assigned when the document is accepted for sending, is printed.
MODE
The type and mode of transmission are printed.
Transmission type:
Mode of transmission:
PGS .
The number of pages that were sent is printed.
If a field exceeds its display capacity, only those characters that fit in the display are printed.

Send TX Report/Send Error TX Report

The Send TX Report is a printed report that informs you of whether a send job has been successfully delivered to its
destination. A Send TX Report can be set to print automatically after each job is sent, or only when there are transmission
errors. (See e-Manual > Settings/Registration.)
•
A list of fax, e-mail, I-fax, file server, and Mail Box transmissions is printed on the Send TX Report. Even if [Report with TX Image] is set to
'On' , the contents of the sent document are not printed on the report if the document was sent using the Encrypted PDF mode.
•
You can also print a Send TX Report with an image of the sent original attached to it. (See e-Manual > Settings/Registration.)
JOB NO .
The four digit number, that is automatically assigned when the document is accepted for sending, is printed.
DEPT . ID
If Department ID Management is set, the Department ID is printed.
ST . TIME (Start Time)
The date and time (in 24-hour notation) at which the document started to transmit are printed.
PGS .
The number of pages that were sent is printed.
Send (TX)
FTP, SMB, WebDAV, Mail Box (BOX), I-Fax (I-FAX), E-mail (MAIL), Fax (FAX)
16
16-5
Reports