Before Starting Sms (Preparations); Enabling The Machine To Be Accessed From Web Browsers - Canon image RUNNER 3245 Getting Started Manual

Before Starting SMS (Preparations)

Before logging in to the SMS, start the machine and follow the procedure below:
Network Settings
Specify [Network Settings] in [System Settings] (from the Additional Functions screen).
Confirm the IP address of the machine. If you do not know the IP address of the machine, consult the network
administrator. (See "Protocol Settings, " on p. 5-3.)
Set Use HTTP to 'On' in MEAP Settings
Select [MEAP Settings] from [System Settings] and set [Use HTTP] to 'On' . If you do not set [Use HTTP] to 'On' ,
you cannot access the machine from your web browser.
•
You cannot connect to the machine via a proxy server. Specify the following settings if you are working in an
environment using a proxy server (as these settings differ depending on the network environment, consult the
network administrator).
- In the proxy server settings of your web browser, add the IP address of the machine to the [Exceptions] (addresses
that do not use a proxy) list.
•
You cannot use SMS if your web browser is not set to enable cookies and JavaScript.
•
When entering characters from your web browser, use characters that can be entered from the touch panel display
of the machine. Otherwise, the characters may not be displayed or recognized correctly on the touch panel display.

Enabling the Machine to be Accessed from Web Browsers

Use to access the machine from a Web browser to use the MEAP function.
The default setting is 'On' .
1
Press
If the Department ID and Password are set, press [System Settings] enter the Department ID and pass-
word → press
(Additional Functions) → [System Settings].
(Log In/Out).

Before Starting SMS (Preparations)

13
13-7