KVH Industries TracVision R5 Owner's Manual page 58

A Guide to TracVision R5/R4
IMPORTANT! Before returning
the antenna, be sure to obtain an
RMA number from KVH's
Technical Support Department
and write the number on the
outside of the box. Shipments
received without an RMA number
will be returned to you at your
expense.
KVH is not liable for damage
caused by improper shipping.
5-4
5. Secure the forward restraint and bracket by
wrapping two tie-wraps around the bend in the
forward restraint and the antenna bracket (at the
end of the LNB bracket) as illustrated in
Figure 5-2.
Figure 5-2 Securing the Forward Shipping Restraint
tie-wraps used
to secure LNB arm
Forward Shipping Restraint
6. Replace the radome.
7. Place the entire antenna unit into its shipping box
using the original packaging material. Secure the
box to a pallet to ensure upright transport to KVH.
Forward Shipping Restraint
Nuts and Washers
Hex Screws and Washers