TracVision R5/R4 requires that the data fields for all transponder
categories be filled in. If the selected satellite does not have
information for one or more of the transponder categories,
default information should be entered in the fields as follows:
Table 2-4 Default Transponder Values
Transponder Data
Frequency
Symbol Rate
FEC Code
Network ID
Polarity and Band
5. Type
@SAVE,A
@SAVE,B
settings (or
satellite.)
@DEBUGOFF
6. Type
ZAP
7. Type
then press Enter to restart the system.
One of your user-defined satellites has now been added to the
TracVision R5/R4 satellite library. This satellite will now be
available the next time you use the SATINSTALL command.
54-0157 Rev. J
Default Value
00000
27500
the same value as provided for those
transponders with data
0x0000
whichever combinations are not
already provided
then press Enter to save your
if data is for the User2
then press Enter .
Installation
2-21