KVH Industries TracVision R5 Owner's Manual page 33

A Guide to TracVision R5/R4
2-22
An Example of Configuring a User-defined Satellite (Europe)
The following is an example of configuring the fictional
YOURSAT 101 as the USER1 configured satellite. Prior to
configuring this satellite or any others, be certain to get the most
up-to-date information from one of the sources previously
discussed.
Table 2-5 Sample User-defined Satellite Configuration (Europe)
YOURSAT 101 at 71 West, DVB decoder, Circular Polarization LNB
Horizontal High
Frequency
Symbol Rate
FEC Code
Network ID
Vertical High
Frequency
Symbol Rate
FEC Code
Network ID
Vertical Low
Data Listed
Horizontal Low
No Data Listed
Example:
Based on this information, the data entered via the PC would
look like this, assuming that YOURSAT 101 would be Satellite A:
SATCONFIG,USER1,7,W,3,L
@DEBUGON
@SATCONFIG,A,98,11966,27500,34,0x0800,H,H,3
@SATCONFIG,A,98,11823,27500,34,0x0800,V,H,3
@SATCONFIG,A,98,00000,27500,34,0x0000,V,L,3
@SATCONFIG,A,98,00000,27500,34,0x0000,H,L,3
@SAVE,A
@DEBUGOFF
ZAP
11.966 GHz
27500
3/4
2048 (dec) = 0x0800
11.823 GHz
27500
3/4
2048(dec) = 0x0800