Table of Contents
Advertisement
CDM-Qx Satellite Modem
Front Panel Operation
(Config%Remote%Ethernet%SNMP%Traps)
Selecting
Traps: Community Version
IP Addr#1
Selecting Community displays the following submenu:
Trap Community:
comtech
Edit the Trap Community string using the ◄ ► and ▲ ▼ arrow keys. Only the first 20
characters on the bottom line are available. The cursor selects the position on the bottom
line (◄ ►) and the character is then edited (▲ ▼).
All printable ASCII characters are available with the exception of backslash (\) (ASCII
code 92) and ~ (ASCII code 126). When the user has composed the string, press
All trailing spaces are removed from the Community string upon entering.
Selecting Version displays the following submenu:
Trap Version:
SNMPv1 SNMPv2
Select SNMPv1 or SNMPv2, using the ◄ ► arrow keys, then press
Selecting IP Addr#1 displays the following submenu:
Trap IP Addr#1:
000.000.000.000
Selecting IP Addr#2 displays the following submenu:
Trap IP Addr#2:
000.000.000.000
These two IP Addresses are Trap Destination's IP Addresses. Edit the IP Address by
using the ◄ ► and ▲ ▼ arrow keys. If both Trap IP Address are 000.000.000.000, it
means Trap is disabled.
displays the following submenu
Traps
IP Addr#2
(◄ ►
(◄ ►
(◄ ►
:
(◄ ►, ENT)
ENT)
▲ ▼,
(◄ ►, ENT)
ENT)
▲ ▼
ENT)
▲ ▼
5–12
Revision 6
MN/CDMQx.IOM
.
ENTER
.
ENTER
Advertisement
Table of Contents
