Table of Contents
Advertisement
CDM-Qx Satellite Modem
Remote Control
Command
Parameter
(Instruction
Type
Code and
qualifier)
Retrieve next 5
N/A
unread stored Events
Number of Unread
N/A
stored Statistics
(Modem Only)
Arguments for
Command or
Response to
Query
80 bytes
Query only
Unit returns the oldest 5 Stored Events, which have not yet been
read
over
the
body{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-
body{CR}, where Sub-body = ABCCddmmyyhhmmss,
A being the fault/clear indicator
F=Fault
C=Clear
I =Info
B being the fault type where:
1=Unit
2=RX Traffic on slot#1
3=RX Traffic on slot#2
4=RX Traffic on slot#3
5=RX Traffic on slot#4
6=TX Traffic on slot#1
7=TX Traffic on slot#2
8=TX Traffic on slot#3
9=TX Traffic on slot#4
A=ODU
B=Power ON/OFF, or log cleared
CC is Fault Code numbers, as in FLT? Or Infor Code, which is:
0=Power Off
1=Power On
2=Log Cleared
3=Global Config Change
4=Redundancy Config Change
If there are less than 5 events to be retrieved, the remaining
positions are padded with zeros.
If there are no new events, the response is RNE*.
3 bytes
Query only
Unit returns the number of stored Statistics, which remain Unread,
in the form xxx.
Description of Arguments
remote
control.
Reply
format:
C-29
Response to
Query
Command
(Instruction
(Target to
Code and
Controller)
Qualifier)
N/A
{CR}Sub-
N/A
Revision 6
MN/CDMQx.IOM
Response to
query
(Target to
Controller)
RNE?
RNE=
{CR}ABCCddmmyyhh
mmss{CR}ABCCddm
myyhhmmss{CR}ABC
Cddmmyyhhmmss
{CR}ABCCddmmyyhh
mmss{CR}ABCCddm
myyhhmmss
(see description of
arguments)
NUS?
NUS=xxx
(see description of
arguments)
Advertisement
Table of Contents
